Test Equipment Depot XFTP SAT LITE, Руководство по эксплуатации

Страница: 21 / 32

21
XFTP SAT LITE Satellite Meter - Operation Manual
4 4. Satellite Configurations
Viewing Configuration Parameters
The parameters of the currently loaded satellite configuration can be
displayed for viewing or changing by pressing the
F1
or
SET
Button.
To select a configuration from the list of satellite configurations to view or
edit parameters, press the
F2
or
LOAD
Button. The satellite
configuration list will appear in order of the configuration memory location
as shown in the following figure.
To select a satellite configuration for viewing simply press or
Direction Button(s) to move up and down through the list one location at a
time or press the or Direction Button(s) to move through the list four
configurations at a time. With the desired satellite configuration
highlighted, press the
ENTER
Button to load the satellite configuration
parameters for viewing and editing. The display will momentarily indicate
Loading... while the instrument is loading the satellite configuration.
Once the satellite configuration parameters have loaded, the details will be
displayed as shown in the following figure. Use the or Direction
Button(s) to view all parameters. You can also edit the parameters from the
displayed screen. For more information on how to modify the satellite
configuration parameters, see the Changing Configuration Parameters in
this chapter.