TESSERA FL-850/PJ4, Руководство по оборудованию

Страница: 6 / 29

2.1 CAN
The CAN controller of the microcomputer is connected to the CAN transceiver (TJA1040). It
supports CAN physical layer. Also, CAN bus signal is connected to DSUB 9pin female
connector.
One terminal can be selected by using jumpers from maximum of three multipurpose terminals, and
can be connected to CAN transceiver.
Only one line must be shorted in each jumper.
Following table shows the connection of V850E2/PJ4.
Connecter
P0_3/TAUA1I4/TAUA1O4/ FCN0TX /UARTH0CTS 1-2
P4_0/UARTH1RXD/INTP1/TAUA1O15/TSG21PTSI2/ENCA1EC/ FCN0TX /UARTH2SC 3-4
N.C. 5-6
P0_4/TAUA1I6/TAUA1O6/ FCN0RX /UARTH0RTS 1-2
P4_1/UARTH2CTS/UARTH1TXD/TSG20PTSI0/ENCA0E0/ FCN0RX /CSIG2SI 3-4
N.C. 5-6
P1_9 /TAUA1I2/TPB1O/CSIG0SC/UARTH0SC MODE0 JP20 Short
P0_0/INTP5/ADCA0TRG2/CSIG0SI/UARTH0RXD/INTP0/ FCN1TX 1-2
P0_8/ FCN1TX /TSG20CLKI/TSG21O4 3-4
P3_5/TAUA1I11/TAUA1O11/TAUA1I10/TAUA1O10/TSG21PTSI0/ENCA1E0/UARTH2RXD/INTP2/ FCN1TX 5-6
P0_1/INTP4/ADCA0TRG1/CSIG0SO/UARTH0TXD/ FCN1RX 1-2
P0_9/ FCN1RX /TSG21CLKI/TSG21O5 3-4
P3_6/TAUA1I13/TAUA1O13/TAUA1I12/TAUA1O12/TSG21PTSI1/ENCA1E1/ FCN1RX /UARTH2TXD 5-6
P3_4 /TAUA1I9/TAUA1O9/TAUA1I8/TAUA1O8/CSIG1SC/TPB1O MODE1 JP24 Short
N.C. 1-2
N.C. 3-4
N.C. 5-6
N.C. 1-2
N.C. 3-4
N.C. 5-6
N.C. MODE2 JP28 Short
N.C. 1-2
N.C. 3-4
N.C. 5-6
N.C. 1-2
N.C. 3-4
N.C. 5-6
N.C. MODE3 JP32 Short
Default
JP34
JP35
CAN 0
CAN 1
CAN 2
CAN 3
RxD
TxD
RxD
TxD
RxD
Jumper
TxD
RxD
TxD
JP22
JP23
JP26
JP27
JP30
JP31
CAN 0 CAN 1 CAN 2 CAN 3