CEC-78K0R/KG3 USER'S MANUAL
3.5 Control From CEC Viewer
CEC data can be sent from CEC Viewer.
3.5.1 "Monitor"
Tab
It sends user defined CEC data from preset keys.
Select "Monitor(1)" Tab for KEY
Following "Preset KEY Config" screen is displayed by clicking "SET" key.
<KEY Setting>
Select Header and Opcode for the sending CEC data at combo box shown above red
area. (You can also enter it at the KEY input area directly.)
1. Select sender's initiator address at "Initiation".
2. Select receiver's destination address at "Destination".
3. Select the class of sending Opcode at "Class".
4. Select Opcode at "Opcode"
5. Move the cursor at the first byte of specific KEY, and click "Create Command" key.
Header and Opcode will be automatically set.
6. Enter Operand for Opcode at the KEY input area directory as needed.
TESSERA TECHNOLOGY INC.
23/31
