Tesmec PT1250, Руководство пользователя

Страница: 16 / 131

HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 13 of
69
4.2 TRANSPORT TYPOLOGIES AND PACKAGE
Transport by land by truck
The machine comes without all the liquids that can be set on fire and protected in the most exposed and
delicate parts by means of cardboard and/or plywood and/or polyethylene extensible film.
To fix the machine on the platform of the transporting unit, use nailed wedges and/or metal brackets
and/or tie rods.
Transport by sea in wooden cases or container
The machine comes without all the liquids that can be set on fire; metal parts are protected with
waterproof wax.
To fix the machine on the package, use nailed wedges and/or metal brackets and/or tie rods.
At the inside, the wooden case foreseen a protection with tarpaper.
Materials usually used for the package are:
⇒
wooden
⇒
nails and/or steel screws
⇒
cardboard and/or paper
⇒
polyethylene extensible film
⇒
adhesive tape.
4.3 UNPACKING
When receiving the machine verify the integrity of the package; advise immediately the manufacturer and
the person in charge of the transport (even with photos) when possible damages due to transport or
tampering with removal, even partial, of the content happen.
Verify if the supplied material corresponds to the ordered one; immediately advise the manufacturer if
there are some discrepancies.
In case of transportation on wooden case, take away, in sequence, the upper cover and lateral panels,
before removing the machine.
During unpacking operations, avoid any shock to the structure or to the machine units, in order to avoid
any damage to the machine itself.
ENVIRONMENTAL INFORMATION
the elimination of packaging materials must be effectuated in conformity with
the norms in force in the relevant country.
DANGER
the non-respect of the above mentioned conditions may cause dangerous
situations as well as damages to the machine with the consequent decline of
any warranty condition.