TESmart HKS0801A30, Быстрый старт

Страница: 2 / 5

www.tesmart.com 2
Panel descriptions
ID Name Description
1 IR in
Connect IR receiver extension cable to this port, then it is
able to use IR control even if the KV switch is installed in
a rack
2 DC 12V 12V DC power supply
3
RS 232
Connect this port to any control termination, then it is able to
select the input sources by sending RS232 commands
4 USB2.0 port
For USB2.0 devices, for example printers, USB hard disk,
barcode scanner, touch pad,etc
5
HDMI output
port
Connect to HDMI display
6
Keyboard and
mouse input
For USB keyboard and mouse input, including wireless keyboard
and mouse
7 HDMI input Connect to HDMI sources
8 USB data Connect to computer by USB Type A to Type B cable
9
Auto scan
time interval
settings
[MIN]
: Press [MIN] to loop between 0~59 minutes
[SEC] : Press [SEC] to loop between 0~59 seconds
[Set] : After setting minutes and seconds, press button [Set] to
enter final scan time interval setting
10 Status LED
Red : Turn off auto scanning mode
Green
: Turn on auto scanning mode
11 IR receiver Receive IR signal
12 LED display Display current selected input port