Tesla WW86491M, Руководство пользователя

Страница: 7 / 196

7
ENG
Installation area
WARNING!
• Stability is important to prevent the product from wandering! Make sure the
machine is standing leveled and stable.
• Make sure that the product should not stand on the power cord.
• Make sure to maintain the minimum distances from the walls as shown in the
picture.
w
w
W > 20mm
Before installing the machine, the location characterized as follows shall be selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0 °C
5. Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washer dryer
WARNING!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed
with the bottom one together. If not, lay the unit down with side surface, then remove the small foam
from the unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
WARNING!
Loosen the 4 transport bolts
with a spanner Remove the bolts including the
rubber parts and keep them for
future use. Close the holes using transport
hole plugs