Tesla WW86490M, Руководство пользователя

Страница: 17 / 40

17
ENG
1 2 3
6 5 4
Open the lower cover cap
Open the filter by turning
to the counter clockwise
Rotate 90° and pull out
the emergency drain hose,
and take off the hose cap
Emergency
drain hose
Remove extraneous matter
After water runs out,
reset the drain hose
Close the lower cover cap
CAUTION!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted
aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, rotate lower cover cap directly to make water run into
basin.
• When the appliance is in use and depending on the program selected there can be hot water in the
pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the
cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Description Reason Solution
Washer dryer
cannot start up Door is not closed properly Restart after the door is closed
Check if the clothes are stuck
Door can’t be opened Washer’s safety protection
design is working Disconnect the power, restart the product
Water leakage The connection between
inlet pipe or outlet hose is
not tighten Check and fasten water pipes
Clean up outlet hose
Detergent residues in
the box Detergent is dampened or
agglomerated Clean and wipe the detergent box
Indicator or display does
not light Disconnect the power
PC board or harness has
connection problem Check if the power is shut down and the
power plug is connected correctly
Abnormal noise Check if the fixing (bolts) have been removed
Check it’s installed on a solid and level floor
Troubleshooting
The start of the appliance does not work or it stops during operation.
First try to find a solution to the problem, If not, contact the service centre.