Tesla WT8H90M, Руководство пользователя

Страница: 27 / 32

27
ENG
MAINTENANCE
Cleaning and Care
Empty the water container
Clean the filters
Clean the filter door
Clean the filter base
1. Hold and pull out the water container with two hands.
2. Tilt the water container, pour out the condensate water into
basin.
3. Install the water container.
WARNING!
• Empty the water container after each use.Otherwise,the
programme will be paused and the ” ” icon will light. After the
container is emptied, the dryer can be restarted by pressing
button.
• Do not drink the condensate water.
• Do not use the dryer without the water container.
This dryer has a primary door fluff filter and a filter in front of the heat exchanger for added protection. Make
sure you clean the filters after each cycle.
1. Open the door.
2. Take out the filter door.
3. Open the filter and remove the fluff on the
filter, clean it in water.
4. Dry the filter door thoroughly before installing
it back.
1. Open the cover.
2. Unlock three locking levers and take out the filter
handle.
3. Remove the filter base and clean it. If there is too
much fluff on the filter, clean it in running water.
Dry the filter thoroughly before installing it back.
4. Clean the rubber sealings both at the filter and
handle.
5. Re-insert the filter.
6. Lock three locking levers and make sure that the
levers are in right lock position.
7. Close the cover until there is a click sound.
NOTE
Take notice of the direction before insert
the filter door.
Filter Door
Filter Base