Tesla WD430M, Руководство пользователя

Страница: 6 / 154

6
ENG
USING YOUR DISHWASHER
Before using your dishwasher:
NOTE
Please check the section 1 “Water Softener” of PART IvI: Special Version, If you need to set the water softener .
Inside Outside
NOTE
If your model does not have any water softener compartment, you may skip this section. Always use salt that
is intended for dishwasher use. The salt container is located beneath the lower basket and should be illed as
explained in the following:
WARNING!
• Only use salt speciically designed for dishwashers use!
Every other type of salt not speciically designed for dishwasher use, especially table salt, will damage the water
softener compartment. In case of damages caused by the use of unsuitable salt the manufacturer does not give
any warranty nor is liable for any damages caused.
• Only ill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the
machine for any period of time, which may cause corrosion.
Please follow the steps below for adding dishwasher salt:
1. Remove the lower basket and unscrew the reservoir
cap.
2. Place the end of the funnel (supplied) into the hole
and pour in about 1.5kg of dishwasher salt.
3. Fill the salt container to its maximum limit with water,
it is normal for a small amount of water to come out
of the salt container.
4. After illing the container, screw back the cap tightly.
5. The salt warning light will stop shining after the salt
container has been illed with salt.
6. Immediately after illing the salt into the salt
container, a washing program should be started
(We suggest using a short program). Otherwise the
ilter system, pump or other important parts of the
machine may be damaged by salty water. This is
void of warranty.
1. Set the water softener
2. Loading salt into the softener compartment 3. Loading the basket
4. Filling the dispenser
Loading The Salt Into The Softener