TI3560 12-24 GPU
4
Section 2 – Product Overview
2.1 – Introduction
Thank you and congratulations on the purchase of your new TI3560 12-24 GPU Ground Power Unit.
This manual contains the complete operating instructions and procedures for the TI2560-12-24 Ground
Power Unit. The TI3560 12-24 GPU has been designed to serve as a stand-alone source of dc electrical
power for aircraft systems and ground support maintenance operations. Using a single 120 Vac power
source, the TI3560 12-24 GPU will provide regulated outputs of 14.25 Vdc at 20 amps continuous and 28.5
Vdc at 25 amps continuous. For vehicle and aircraft starting, the 12 Vdc and 24 Vdc outputs can deliver up
to 3000 peak amps.
The unit’s high-capacity power cells and circuitry are encased in a rugged enclosure. This internal circuitry
incorporates an intelligent recharging system that allows the TI3560 12-24 GPU to rapidly recharge from any
standard 110-130 Vac outlet receptacle. The unit also comes equipped with independent dual outputs and
built-in Charge Status Meters (via the “Push to Test” button) that also serve as recharge state indicators for
both dc outputs.
Figure 2.1.1 – TI3560 12-24 GPU
2.2 – Indication of Terms: Shall, Should, and May
Within this technical manual the word “shall” is used to indicate a mandatory requirement for proper
operation and warranty purposes. The word “should” is used to indicate a non-mandatory but preferred
method of accomplishment. The word “may” is used to indicate an acceptable method of accomplishment.
