
TI2000-009 Transformer
13
6
Operating Procedures
6.6 – Connect DC Cable to Aircraft
To prevent arching while connecting DC power to the aircraft, press the DC output “OFF” button, then connect
DC power to the vehicle. Ensure ground power cable connector is fully seated into aircraft receptacle. When
you are ready to supply DC power, press the DC output “ON” button and it will illuminate. DC bus power
should come on and the aircraft’s voltmeter should indicate 23.5 to 24 VDC (23 VDC minimum).
Starting Aircraft Engine
Check power cable for security and correct installation prior to engine start. Follow ground power unit engine
starting procedure as specified in aircraft operator’s manual.
Figure 6.6.1 Connecting DC cable to aircraft and starting engine
Содержание TI2000-009
Страница 25: ......