Tesla RI2500H, Руководство пользователя

Страница: 17 / 68

17
ENG
Replace the lamp
CAUTION!
Before replacing the lamp, shall disconnect the
appliance from mains power supply.
Lamp specification is listed in rating label.
Follow below process to replace the lamp:
1. Set the temperature regulation knob at
number “0” to switch off the appliance.
2. Unplug the appliance to make sure the
appliance is disconnected from main power
supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp according to the opposite
direction, then replace the lamp cover and
screw.
7. Plug in the appliance and regulate the knob to
right position.
Defrosting of the freezer
The freezer compartment, however, will become
progressively covered with frost. This should be
removed. Never use sharp metal tools to scrape off
frost from the evaporator as you could damage it.
However, when the ice becomes very thick on the
inner liner, complete defrosting should be carried
out as follows:
• pull out the plug from the socket;
• remove all stored food, wrap it in several layers
of newspaper and put it in a cool place;
• keep the door open, and placing a basin
underneath of the appliance to collect the
defrost water;
• when defrosting is completed, dry the interior
thoroughly
• replace the plug in the power socket to run the
appliance again.