Tesla MODEL 3 2020, Руководство пользователя

Страница: 215 / 271

Checking and Cleaning
Wiper Blades
Periodically clean the edge of the wiper
blades and check the rubber for cracks, splits,
and roughness. If damaged, replace the blade
immediately to prevent damage to the glass
and improve visibility.
Contaminants on the windshield, or on the
wiper blades, can reduce the effectiveness of
the wipers. Contaminants include ice, wax
spray from car washes, washer fluid with bug
and/or water repellent, bird droppings, tree
sap, and other organic substances.
Follow these guidelines for cleaning:
• Clean the windshield and wiper blades
using washer fluid, isopropyl (rubbing)
alcohol, or non-abrasive glass cleaner
approved for use on automotive glass and
rubber. Inappropriate products can cause
damage or smears, and create glare on the
windshield.
• Lift the wiper arm a short distance away
from the windshield, just far enough to
access the wiper blade. Do not lift a wiper
arm beyond its intended position.
If the wipers remain ineffective after cleaning,
replace the wiper blades.
Replacing Wiper Blades
For optimum performance, replace the wiper
blades at least once a year.
NOTE: Only install replacement blades that
are identical to the original blades. Using
inappropriate blades can damage the wiper
system and windshield.
To replace the wiper blades:
1. Shift into Park and turn off the wipers.
2. Touch Controls > Service > Wiper
Service Mode > ON to move the wipers to
the service position.
3. Lift the wiper arm a short distance away
from the windshield, just far enough to
access the wiper blade.
CAUTION: Wiper blades do not lock
into a lifted position. Do not lift a
wiper arm beyond its intended
position.
4. Place a towel betweem the wiper arm
and windshield to avoid scratching or
cracking the windshield.
5. Hold the wiper arm and press the locking
tab while sliding the blade down the arm.
6. Align the new wiper blade on the wiper
arm and slide it toward the end of the
wiper arm until it locks into place.
7. Turn Wiper Service Mode off to return
the wipers to their normal position.
Cleaning Washer Jets
If a windshield washer becomes blocked, use
a thin strand of wire to clear any blockages
from the nozzles.
WARNING: Do not operate the
washers while cleaning Model 3.
Windshield washer fluid can irritate
eyes and skin. Read and observe the
washer fluid manufacturer’s
instructions.
Wiper Blades and Washer Jets
213 Maintenance