Tesla LifeStar UV550, Руководство пользователя

Страница: 40 / 41

TROUBLESHOOTING
Problem Cause Solution
1
The vacuum cleaner
suddenly stopped
working.
The vacuum cleaner
has overheated.
The vacuum cleaner is equipped with motor
protection against overheating. Clean the
vacuum cleaner filters, empty the dust tank
and let the vacuum cleaner cool down.
2
The vacuum cleaner
does not work.
The vacuum cleaner is
not properly
connected to the
mains.
Zkontrolujte připojením jiného elektrického
spotřebiče, že je zásuvka funkční.
The vacuum cleaner
was not switched on
by pressing the „2“
button (On/Off).
To switch on the vacuum cleaner, press the
„2“ button (On/Off).
3
The vacuum cleaner
has a low suction
power.
The inlet filters of the
vacuum cleaner and
the space for rotating
the cleaning brush are
clogged.
Clean the inlet filters and cleaning brush.
The dust tank is full. Empty the dust tank.
4
The UV lamp does
not work.
The vacuum cleaner is
too far from the
surface to be cleaned
or the cleaning angle
is greater than 30°.
When cleaning, it switches on automatically
at a distance of 5 cm from the surface to be
cleaned and the angle of inclination of the
vacuum cleaner must not exceed 30°.
The UV lamp is dirty. Clean the UV lamp with a clean, dry cloth.
The UV lamp is
damaged. Contact the TESLA service department for a
professional UV lamp replacement.
WARRANTY REPAIR
For warranty repair, contact the dealer where you purchased the TESLA product.
The warranty DOES NOT APPLY to:
 using the device for other purposes than it was designed to
 normal wear and tear
 failure to observe the „Important safety instructions“ stated in the user manual
 electrical or mechanical damage caused by improper use
 damage caused by natural elements such as water, fire, static electricity, power surges etcetera

damage caused by an unauthorized repair

unreadable serial number