Tesla F48E-W, Руководство пользователя

Страница: 4 / 92

4
4, Make sure the phone is under WI-FI Connection, and fill in the password of
WI-FI which phone connected. Then Connecting starts.
5, Connection 100% after few seconds / minutes. Then auto enter into “Device
added successfully” page.
Note: Make sure scale and phone under same Wi-Fi Network to repair. Pairing may
take a few minutes based on the WI-FI signal. The App will show the progress. If
pairing fails, cIick “ View help” check how to do or “got it” retry again with repeat Add
Device step 3&4.
6. After Room Selection and click” Done” , “Select the user” and “Add personal
information”,then enter into Smart Scale Main Page.
6.1 , Set up
Click right bottom ” Set up” to do Unit switching and Automatic distribution ON or
OFF. Recommendation setting to ON.
If you select OFF, the new measurement value will exist in middle part of main page
and wait for your View and manually distribute to which user.
6.2, Take Measurements
Stand on the scale with your bare feet and ensure your feet are touching the left
and right electrodes located on the scale (if scale have electrodes) until weight
numbers is fixed then get off.
The body values will automatically send the results to the phone. When you open
the App, you can see your details.