Tesla CM5220SW, Руководство пользователя

Страница: 19 / 252

19
ENG
Using And Description Of Hob Section For Vitroceramic
Using Hot Plates
Level
1
Level
2
Level
3
Level
4
Level
5
Level
6
Level
7
Level
8
Level
9
Max.
140 mm
Commutator
130
W
206
W
350
W
500
W
850
W
1200
W
— — — —
180 mm
Commutator
180
W
470
W
790
W
850
W
1230
W
1700
W
— — — —
180 mm
Regulator
1800
W
1800
W
1800
W
1800
W
1800
W
1800
W
1800
W
1800
W
1800
W
—
140/250 mm
1000
W
1000
W
1000
W
1000
W
1000
W
1000
W
1000
W
1000
W
1000
W
1800
W
120/180 mm
Dual Hilight
700
W
700
W
700
W
700
W
700
W
700
W
700
W
700
W
700
W
1700
W
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
80 mm 200 W 250 W 450 W --- --- ---
145 mm 250 W 750 W 1000 W --- --- ---
180 mm 500 W 750 W 1500 W --- --- ---
145 mm rapid 500 W 1000 W 1500 W --- --- ---
180 mm rapid 850 W 1150 W 2000 W --- --- ---
145 mm 95 W 155 W 250 W 400 W 750 W 1000 W
180 mm 115 W 175 W 250 W 600 W 850 W 1500 W
145 mm rapid 135 W 165 W 250 W 500 W 750 W 1500 W
180 mm rapid 175 W 220 W 300 W 850 W 1150 W 2000 W
220 mm 220 W 350 W 560 W 910 W 1460 W 2000 W
1. You operate the hob with the ring switches on the control panel of oven. This switch regulates the energy in
order to reach desired temperature set by you.
2. In order to have a good cooking result from the hob, the pans bottom should be as thick and flat as possible.
3. Bottom of pans and cooking zones should be the same size. If possible, always place lids on the pans. Always
place cookware on the cooking zone before it is switched on. Switch cooking zones off before the end of the
cooking time, to take advantage of residual heat.
4. Turn the knob to clockwise for starting to operate. Temperature set up by the knob position on the line
gradually increasing up to max. (Single zone)
5. For dual cooking zone the first ring operating like single zone; second ring starts to operate after extra turning
by some more force to clock wise on the “max” region end of the ring sign. When you turn to counter clock
wise, the first ring will operate as maximum range and the second ring’s power will reduce up to you desire
temperature.
1. Electric hotplates have standard of 6 temperature levels. (as describe herein above)
2. When using first time, operate your electric hotplate in position 6 for 5 minutes. This will make the agent on
your hotplate which is sensitive to heat get hardened by burning.
3. Use flat bottomed saucepans which fully contact with the heat as much as you can, so that you can use the
energy more productively.
WARNING!
With intensive use of the appliance, the hot plates’ rings and surrounding area can change
color. Service interventions are not covered by warranty in that case.