Tesla Air 6, Руководство пользователя

Страница: 6 / 72

6
ENG
PM 2.5 0-50 51-100 Above 101
Color on the LED lamp Blue Green Red
Air quality Perfect Okay Bad
Operation in "AUTO" mode Sleep Mid Max
Filter replacement time indicated
Prefilter Cyclic cleaning
Combined HEPA filter and activated carbon filter Recommended filter replacement every 6 months.
Water filter in humidifier tank Recommended filter replacement every 6 months.
Assuming: the purifier works 8 hours a day, in a normal environment.
If there is a lot of pollution in the room where the purifier is operated, the filters should be replaced more frequently.
Air quality sensor: when the device is running, it automatically
checks the air quality.
Humidity sensor: when the device is running, it automatically
checks the humidity in the room.
PM 2.5 and% RH display: When the purifier is running, the
digital screen will alternate between real-time PM 2.5 data and%
RH humidity. PM 2.5 is shown in 3 digits and humidity is shown in
2 digits.
Note: If you want to turn off the air quality LED backlight, you can do so in any mode except “Sleep”. To perform this process, hold
the On / Off button for 5 seconds - the LED will turn off. To turn on, hold down the same button for 5 seconds and the LED air quality
indicator will turn on again.
• Depending on the degree of air pollution in the room where the purifier is used, the filter replacement cycle may vary. To achieve the
best possible air quality, replace the filter as indicated by the device.
• After changing filters, hold down the “AUTO” button and the “Humidifying” button for 3 seconds until the red light of the filter
replacement indicator turns off. This means that the replacement is complete.
Ionizer: when you turn on the device, the ionizer will also turn on
automatically.
Sound “Bep”: When operating the device, the sound “Bep” will
indicate the selected action.
LED air quality indicator light: when the device is working, the
LED light shows the air quality in real time with 3 different colors:
red, green and blue.
Functioning of the purifier:
Information on the time to replace the filter
STORAGE
When the purifier is not used, it should be properly stored.
Recommended actions:
1. Turn off the air purifier and remove the plug from the
electrical outlet.
2. Clean the air purifier and pre-filter.
3. Allow all parts to dry completely before storing the device.
4. Place the filters in separate airtight plastic bags.
5. Store the air purifier in a cool and dry place.
6. Always wash your hands thoroughly after handling the filters.