Tesla 32S307WH, Руководство по эксплуатации

Страница: 17 / 172

17
ENG
Satellite Dish Settings (Step 1-3, refer to Fig. 1)
A set of satellite dish settings must be configured for each wanted satellite before
performing a channel scan.
Satellite - Select the satellite for this TV.
LNB Type
- Make sure the LNB type is appropriate for your dish.
LNB Power - Enable or disable power supply for the LNB.
22KHz - Select the 22KHz to set 22K switch to ON/OFF. Use auto mode to switch 22KHz
on or off depending on the LNB type.
DiSEqC1.0/1.1
- Select the DiSEqC mode for the selected LNB.
Fig. 1
Step 2
Step 1
Step 3
Step 1: Highlight Satellite and press ENTER to access the satellite list and select the desired
one.
Step 2: Highlight LNB Type and press ENTER to select the LNB type.
Step 3:
Make sure that
22KHz, DiSEqC1.0/1.1
switch corresponds to the selected satellite.
After completing the above steps, press the blue button to search for the channels.
DTV Manual Tuning
Search and store programmes manually.
Channel
DTV Manual Tuning
Select the source type (DVB-T or DVB-C) and search digital programmes manually. In the
Channel menu, select
DTV Manual Tuning and press ENTER button to access.
1. Press

or

to select channel number and then press ENTER to start the search.
2. The search stops when programme is found and this program will be stored in the current
channel position. If you want to stop the search, press the MENU button.
ATV Manual Tuning
First select the source type of ATV. Then select
ATV Manual Tuning
in the Channel menu and
press ENTER button to access.
1. Highlight and press  or  tto select Storage To 1 (or any other number), Sound System
or Channel number . Then select Search and press ENTER to start the search.