Tesla 32K307BH, Руководство по эксплуатации

Страница: 14 / 223

12
ENG
DTV Manual Tuning
Press
“MENU”
key and CHANNEL menu will be displayed on the screen. Press
“  /  ” key to select DTV Manual Tuning. Press “OK” key to enter into DTV
Manual Tuning menu (Fig.6). Press “ t / u ” key to select channel, then press “OK”
key to conduct search. After searching, the DTV Manual Tuning menu will close
automatically.
ATV Manual Tuning
Press
“MENU”
key and CHANNEL menu will be displayed on the screen. Press
“  /  ” key to select ATV Manual Tuning. Press “OK” key to enter ATV Manual
Tuning menu (Fig.7). Press “  /  ” key to select the Current CH. Press “ t / u ”
key to search manually. After searching, you can save the searched channel to
other positions. At this time, press “
t
/
u
” key to select Storage To, and then
press “

/

” key to choose the channel number. After selecting Fine-Tune,
press“ t / u ” key to tune from low frequency or high frequency.
During manual searching, you can also press
“MENU”
key to interrupt the search
and return to the last menu.
Programme Edit
Press “MENU” key and CHANNEL menu will be displayed on the screen. Press
“

/

” key to select Programme Edit . Press “OK” key to enter Programme Edit
menu (Fig.8), then press “

/

” key to select the channel you want to edit.
Delete: : Select a channel and press “Red” key to delete it.
Move: Select a channel and press “Green” key, press “  /  ” key to select the
channel position where you want to move the channel. Press “OK” key to
confirm. You can press “MENU” key to return last menu.
Favourite:
Choose a channel and press
“Yellow”
key. Favourite icon will
appear behind the selected channel. Press “Yellow” key again to cancel it. Press
“MENU” key to return main menu.
Skip: Select a channel and press “Blue” key. SKIP icon will appear behind the
selected channel. Press “Blue” key again to cancel it. Press “MENU” key to return
to main menu.
Signal Information
Press “MENU” key and CHANNEL menu will be displayed on the screen. Press
“

/

” key to select Signal Information. Press “OK” key to enter into Signal
Information menu. You can look through signal information.
Note: Before you press “MENU” key, please select the input source first. You can
select it only in DTV mode.
Press “MENU” key and CHANNEL menu will be displayed
on the screen. Press “ t / u ” key to select PICTURE (Fig.9),
then press “  /  ” key to choose the item you want to adjust
or set.
Picture Mode:
Press
“OK”
key to enter into Picture Mode
submenu. Press “  /  ” key to select item want to adjust or
set.
PICTURE
DTV Manual Tuning
UHF CH 21
Bad Normal Good
NO SIGNAL
ATV Manual Tuning
Frequency 175.25 MHz
Storage To 1
DK
Current CH 1
Search
Fine-Tune
MENU: Return
Save
OK: Enter
1 C-01
2 S-42
3 C-06
4 C-11
5 S-11
6 S-13
7 C-21
8 C-51
MENU: Return
Programme Edit
Delete Move Skip Favourite
ATV
ATV
ATV
ATV
ATV
ATV
ATV
ATV
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Picture Mode User
Color Temperature Standard
Aspect Ratio Full
Noise Reduction Middle
PC Setting
PICTURE
OK: Enter
MENU: Return