Tesla 3 2022, Руководство пользователя

Страница: 148 / 266

About the Security System
If Model 3 does not detect an authenticated phone, key
fob, or key card and a locked door or trunk is opened, an
alarm sounds. The headlights and turn signals also flash.
To deactivate the alarm, press any button on the mobile
app or tap your key card or key fob against the card
reader located just below the Autopilot camera on the
driver's side door pillar.
To manually enable or disable the alarm system, touch
Controls > Safety > Security Alarm . When enabled,
Model 3 activates its alarm one minute after you exit, the
doors lock, and a recognized key is no longer detected.
A battery-backed siren (if equipped) sounds in
situations where a locked door or trunk is opened and
Model 3 does not detect a key nearby. If you also want
this siren to sound in situations where the vehicle
detects motion inside the cabin, enable
Tilt/Intrusion
(see Tilt/Intrusion (if equipped) on page 146 ).
NOTE: If Model 3 is in Sentry Mode (see Using Sentry
Mode on page 147 ), you must disable Sentry Mode
before you can disable the Security alarm or the Tilt/
Intrusion alarm.
Tilt/Intrusion (if equipped)
The Security Alarm must be on to enable Tilt/Intrusion .
Tilt/Intrusion sounds the alarm in your vehicle if Model 3
detects motion inside the cabin, or is moved or tilted
(for example, with a tow truck or jack). To enable, touch
Controls > Safety > Tilt/Intrusion .
The intrusion sensor automatically disables in situations
where the climate control system is operating when you
leave your vehicle. To override, you can manually turn
the Tilt/Intrusion Sensor on again after choosing Keep
Climate On, Dog, or Camp Mode.
NOTE: If you plan to leave something that moves inside
your locked vehicle, remember to turn off Tilt/Intrusion .
If this setting is on, any motion detected inside Model 3
activates the intrusion alarm.
PIN to Drive
To increase security, you can prevent Model 3 from
being driven until a 4-digit PIN (Personal Identification
Number) is entered. To enable this setting, touch
Controls > Safety > PIN to Drive and follow the on-
screen prompts to create a driving PIN.
When enabled, in addition to entering the 4-digit driving
PIN to drive, you must also use it to enter Valet mode for
the first time and create the 4-digit valet PIN to enter
and exit Valet mode. In Valet mode, Model 3 can be
driven without the need for the valet to enter a driving
PIN. The PIN to Drive setting is disabled whenever Valet
mode is active.
If you forget your driving PIN, touch the link to enter
your Tesla login credentials on the PIN to Drive popup,
then follow the on-screen prompts.
NOTE: In the unlikely event that your touchscreen is
unresponsive, you may be unable to enter the PIN. In this
case, first try to restart the touchscreen (see
Restarting
the Touchscreen on page 49 ). If the touchscreen is still
unresponsive, you can still bypass PIN to Drive by
turning on Keyless Driving in the Tesla mobile app.
Glovebox PIN
For additional security, you can protect the contents in
your glovebox with a 4-digit PIN. To enable this setting,
touch
Controls > Safety > Glovebox PIN and follow the
on-screen prompts. When enabled, you are prompted to
enter the PIN to open the glovebox. To disable this
setting, select the toggle to disable and then enter the
PIN.
If you forget your glovebox PIN, reset it by entering your
Tesla login credentials, then follow the on-screen
prompts.
NOTE: Using a Glovebox PIN allows the glovebox to be
opened even when Model 3 is in Valet mode.
Security Settings
146 MODEL 3 Owner's Manual