
Removable roof
7-14
Comfort and convenience
5.
Push the roof into position on the front
header rail and then lower the rear
edge of the roof.
6.
Engage the hook on the rear mounting
brackets with the fixings on the rear
header rail.
7.
Use the hex key supplied in the toolkit
to tighten the bolts just enough to
keep the rear brackets engaged. Do
not fully tighten.
Caution: To prevent damage to the
roof, only use only the hex key
supplied in the toolkit to tighten the bolts.
8.
Ensure the roof is correctly aligned on
the vehicle.
9.
Holding the rear mounting brackets to
prevent them from twisting, tighten
the bolts to secure the roof in place. Do
not overtighten.
10.
Check and tighten the bolts securing
the front locating pins to the hard-top.
WARNING: Make sure that the roof is
securely fitted by trying to lift each
corner in turn. If any movement is evident,
check and tighten the roof fixings. Driving
with a loose or incorrectly secured roof
could result in an accident which could
lead to serious injury and even death.
▲
11.
Check that both doors shut correctly
with the windows in the fully raised
position.
12.
Position the front header rail trim panel
and align the bolts to the holes in the
roof.
13.
Starting with the bolt in the center,
tighten the three bolts to secure the
trim panel. Do not overtighten.
WARNING: Do not drive the vehicle
with the trim panel removed. In a
collision, injury could result from contact
with the brackets.
▲
14.
Return the hex key to the tool kit.
Note:
The window position has been
adjusted to accommodate the roof
supplied with your vehicle. To prevent
water from entering the passenger
compartment when using the alternate
type of roof, you should have Tesla Motors
or an authorised repairer adjust your
windows.
Removing the hard-top
1.
Open both doors.
2.
Using the hex key supplied in the
toolkit, loosen the three bolts securing
the header rail trim panel to the roof.
3.
Remove the trim panel.
4.
Loosen the two bolts securing the rear
of the roof to the vehicle.
5.
Disengage the brackets from the rear
header rail.
6.
With the aid of an assistant, lift the rear
edge of the roof and slide it towards
the rear of the vehicle to disengage the
front locating pins.
7.
Store the roof in a safe place where it
will not get damaged. If the roof must
be stood vertically, use a suitable soft
floor covering to protect the corners.
8.
Return the hex key to the tool kit.
TR1459
Содержание 2010 Roadster
