55
6
1
Remove the body cap.
2
Install either the BODY or FACE head of the accessories on the body.
Insert the head fully to the rear.
* When you receive the product, the body has the BODY head already installed
on it.
●
Do not remove the head with the power on.
●
If the head is not installed fully or is uninstalled, the power cannot
be turned on.
●
While using the appliance, the power is turned off owing to action
of the safety device if water enters the head inserting block during
replacement of the head or when installation of the head is not fully
completed. This does not indicate a failure.
●
To remove the head, place the appliance sideways as shown in the
figure and pull out the head slowly while holding both sides with
your fingers.
Pulling out the head with wet hands or with the head faced toward
your face may result in injury due to the spatula tip.
●
When removing the head, do not hold the spatula.
Failure to follow these instructions may result in failure of the the
appliance.
3
Remove the water tank cover from the back and take out the water tank.
Install
Remove
Water tank cover
Water tank
How to Use
Skin care with this appliance should be undertaken for no more than once a day, and the time of use should
be within 10 min for one session. The number of times of use should be once or twice a week.
When 10 min have passed after pressing the Power switch, the power is turned off automatically.
Do not use this appliance for care around
the eyes or ears.
(Failure to follow these instructions may result in accident or adverse
effects.)
If your skin has an injury or wound, the appliance should not be used
under any circumstances.
(Failure to follow these instructions may result in skin problems or injury.)
WARNING
