6
Charging the Battery
1
Make sure that the Power switch is off. Then, connect the power
adapter to the body and receptacle.
●
The battery lamp lights up.
●
Do not push the power adapter’s plug-to-appliance into the body’s socket with
excessive force, or tilt it in a forced manner. If you do so, the socket may break.
●
Make sure that the power supply voltage is 100 to 240 V.
2
After the battery lamp is extinguished, unplug the power adapter from
the receptacle and body.
●
The standard time for charging is approx. 5 hours.
●
The body and power adapter may become slightly hot; this does not indicate a
failure.
●
A battery fully charged once enables the appliance to operate approx. six times
(approx. 10 min for each session). (The number of times may decrease, depending
on the conditions for use of the appliance, for example, how you clean the
appliance.)
How to Have a Long-lasting Nickel Metal Hydride Battery
●
When storing the product, fully charge it before storage.
●
When not using for a long time, still charge periodically every six months.
When the operating time after charging becomes extremely short, the following procedure can
refresh the battery and improve operating time.
(1) Press the power switch and mist button simultaneously for 10 seconds or more.
(2) Stop pressing when a beeping sound is heard and check that the battery lamp is flashing.
(3) Charge until the battery lamp goes out.
After that, please use as normal.
If it cannot be used even after performing the procedure above, the nickel-metal hydride battery
may have reached the end of its life. Please contact the store from which purchased.
* Do not use while charging.
