Tescom NOBBY NTE11, Руководство пользователя, Страница: 11 / 32

【When Using Overseas】
●
This product can be used with AC100-240V power.
1 2
3
②
【When Using while Plugged In】
For charging,
4 3
2 1
Care and Maintenance
●
Main Unit
Use a soft cloth dipped in water and well wrung-out to wipe.
●
Roller Ball
Use a cloth dipped in water and well
wrung-out to wipe the dirt.
5
Roller Ball Ball Cover Main Unit
●
Make sure the power is OFF and the power adapter is not attached before performing maintenance.
The ball cover (and roller
ball) come off.
Connect the power
adapter to the main
unit and outlet.
After use, remove the power adapter
from the outlet and main unit.
Turn the ball cover counter-clockwise
and remove the ball cover.
Rotate the ball cover clock-
wise to fix it to the main unit.
Place the ball cover (and roller ball)
on a towel on top of a desk, and push
the ball from the top to remove it.
While holding the ball cover in one
hand, push the ball in from the
rear side of the ball cover.
Push the power
switch and turn
on the power.
●
Follow directions on
(Pages 7-8) for use.
follow the directions on How to Charge (Page 5).
● Make sure the power is OFF. If you accidentally turn on the power, it could shock you or cause a malfunction or short circuit.
● Do not wash the main unit with water. Do not immerse it in water or splash water on it. It could cause malfunctions.
● Do not wipe with benzine, paint thinner or alcohol. It could cause deformation or discoloration.
● Do not perform maintenance near children. The cap, ball cover or roller ball could be accidentally swallowed.
Troubleshooting
①
②
①
*Be careful not to
push the ball too
hard.
W a r n i n g
Product Name Eye Care Rated Time 7 minutes（auto OFF）
Product Number NTE11 Charge Time Approx. 5 hours
Power
Source
Power Adapter AC100-240V 50/60Hz
Weight 86g（main unit）
Main Unit
Nickel Metal Hydride Battery
（DC3.6V, 750mAh）1 unit
Power Consumption When plugged in 10W
Accessories Power Adapter, Cap
Dimensions
Height 135mm x width 34mm
x depth 33mm（main unit）
Issues Possible Reasons
In the case of other errors or malfunctions, immediately stop use and contact the information number on
the product box.
Solutions
Specifications
The roller ball is too hot.
The power cord is twisted
and does not return.
When bending the power
cord, the battery light
turns on or not.
Charging does not work.
(The battery light turns on.)
It can only be used a few
times after charging.
The roller ball does not
warm up. The HI and LOW
lights do not turn on.
Charging does not work.
The power cord or power
adapter is abnormally hot.
When charging or using while
plugged in, there is a shock
when touching the main unit.
The safety device is not
functioning properly.
The power cord is almost
disconnected.
Stop use immediately and
contact the information
number on the product
box.
The nickel metal hydride
battery is getting old.
The product is charged despite
there still being charge remaining.
(Top-up charge)
The battery is dead.
The power adapter is not
connected properly.
The power adapter is
malfunctioning.
The power adapter is not
connected properly.
The plug is not connected
to the outlet firmly.
This is due to static electricity
build-up in your body.
Use the battery fully
before charging.
Charge it or use it while
plugged in.
Make sure the power adapter
is securely connected to the
main unit and the outlet.
Contact the information
number on the product box.
Firmly connect the unit-side
plug of the power adapter to
the main unit socket.
The issue may be with the out-
let. Contact the information
number on the product box.
This is not a malfunction.
No action needs to be taken.
9 10