Tescom Neoline Pro, Руководство пользователя

Страница: 15 / 54

13
NEOLINE PRO � 1/1 � 1-3 kVA � ONLINE UPS
USER MANUAL
13
Mute icon: Indicates the audible alarm is disabled / mute.
Press the mute key in the battery mode, themute icon flash.
Fan icon:Indicates fan working status. When the fan normally runs, the icon
displays rotation; if the fan is not connected or faulty, the icon will flash.
Fault icon:Indicates UPS is in fault mode.
Battery status icon: Indicates the battery capacity of 0-25%, 26-50%, 51-
75%, and 76-100%. When the capacity of battery get low or battery
disconnected, the batterystatus iconwill flash.
UPS status information
⚫
In non-setting mode, it displays UPS output information when UPS
normally runs; Fault code will be told in fault mode.
⚫
In setting mode, users could adjust different output voltage, activate ECO
mode, activate CUCF mode, select an ID number and so on by operating
function setting keys and inquiring key.
Operation mode
Indicates the power capacity of UPS within 20 secondsafter starting up.
IndicatesUPS operation mode in 20 seconds,such as STDBY (standby
mode), BYPASS (Bypass mode), LINE (AC mode), BAT (Battery mode),
BATT (Battery Self Test mode), ECO (Economic mode), SHUTDN
(Shutdownmode), CUCF (Constant Voltage and Constant Frequency mode).
LED indicator light functions
They are respectively inverter light and fault light from left to right.
The inverter light (green LED indicator light) illuminates continuously: it
indicates that UPS is in mains mode or ECO mode or power supply status in
battery mode.
The fault light (red LED indicator light) illuminates continuously: it indicates
that UPS is in fault status.
Note: For LED indication in different modes, please refer to LED/display
panel and alarm list.
5.3 UPS On/Off operation
Operation Description
Turn on the UPS
> Turn on the UPS with mains power
⚫
With mains power connected, UPS works in bypass mode, its output is same
as the input voltage within the input range. If there is no need of output voltage
when mains power connected, you can set up bPS to ‘OFF’. Default bPS is