19
N°
Description
1
Measurements’ list
2
Status bar
3
Main and secondary results of the last measure
4
Help zone
5
Contextual actions (options are displayed regarding the software
active page and the action the user performs)
N°
Description
1
Block title
Label automatically created
Editable name
2
Scroll bar
In order to move
up/down in the measurements’ list
3
Active mode
4
Calculated or measured value
5
Active reference when creating the block
6
Block characteristic
7
Block action
8
Active reference
9
Icons related to secondary results
10
Secondary results
The values
are not automatically saved in the measurements’ list
11
Main result
Is automatically saved as last block in the measurements’ list
12
Single/double probing
Valid for MICRO-HITE only
13
System state
Displays hour, units and active peripherals
14
Measuring force
Displays the status of the pressure applied on the probe
15
Save
In order to save the wanted secondary result as a block in the
measurements’ list
16
Help picture
17
Help text
Zone defined to display texts in order to help the user when going
through processes and modes.
5.6 ST1 & ST2 modes
The two main modes integrated in the height gauge range are defined by the names
ST1
and
ST2
. These are the most frequently used modes. The major difference between these
two measurement modes is closely linked to the features (height, diameter etc.) that will be
determined during one measurement sequence. The determination of certain features does
not require an inversion of the probing direction, while others entirely depend on it.
