TES TES-1362 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 17

TES TES-1362 Скачать руководство пользователя страница 10

8

16.  Minimum measurement value indicator.
17.  Maximum measurement value indicator.
18. Data-hold indicator.
19.  Humidity and dew-point temperature measured value.

IV.

GENERAL PRECAUTIONS AND
PREPARATIONS FOR MEASUREMENT

1. Before operating the instrument, examine it to make sure it

is not damaged.

2. Retain all packing materials in case the unit has to be

returned for repair or calibration.

3. Ensure the batteries are correctly installed before turning

the instrument on. If using an external power adapter,
ensure it is suitable, has the correct polarity and is
undamaged.

4. Ensure the battery cover is correctly fitted, otherwise

measurement errors may occur.

5. If the instrument is to be stored for a long time, remove the

batteries to prevent leakage and corrosion.

6. Do not use or store this meter outside the operating or

storage environmental conditions qouted in the
specifications.

V. OPERATING

PROCEDURE

1. Before using the instrument, install the batteries as follows:

Remove the rear cover, and carefully install Qty 6 AAA
batteries, observing correct polarity.
Insert the supplied temperature and humidity probe plug into
the corresponding meter socket. If required, select a suitable

«
...
8
9
10
11
12
...
»

Содержание TES-1362


















Отзывы:

Нет отзывов