Teryair 59 10 21, Руководство по эксплуатации и обслуживанию

Страница: 3 / 9

FF-MM-408-REV - 00
Page 3
Operation and Maintenance Guide Electric Angle Grinders
Introduction
Teryair Electric Angle Grinders are used for continuos heavy duty work for all grinding applications.
Intended Use
The use of Electrically operated Angle Grinders
are recommende for removal of any types of
surface irregularities , Castnig Fins , leveling
of weld joints,Smoothening of Torch /Flame
cut edges , Grinding of stones & masonry with
more effective & efficient manner.
This grinder is user friendly as it fits into even
a tightest / narrow sharp corners and at small
space to perform its defined function.
Safety Instructions
• Stay alert and use common sense - Do
not operate the tool when you are tired or
under the influence of alcohol, drugs or
medication.
• Always wear eye protectors when using the
angle grinder - Eye protectors must provide
protection from flying particles from the
front and the side.
Teryair
Model No
IMPA Code
For Wheel
Diam
Power
Supply
Input
Power
Frequency
No Load
Speed
AG4E-110V 59 10 21 100 mm AC110V 1PH 680 W 50/60 Hz 11000 RPM
AG5E-110V 59 10 22 125 mm AC110V 1PH 800 W 50/60 Hz 11000 RPM
AG6E-110V 59 10 23 150 mm AC110V 1PH 1600 W 50/60 Hz 8500 RPM
AG7E-110V 59 10 24 180 mm AC110V 1PH 2000 W 50/60 Hz 6000 RPM
AG4E-220V 59 10 31 100 mm AC220V 1PH 680 W 50/60 Hz 11000 RPM
AG5E-220V 59 10 32 125 mm AC220V 1PH 800 W 50/60 Hz 11000 RPM
AG6E-220V 59 10 33 150 mm AC220V 1PH 1600 W 50/60 Hz 8500 RPM
AG7E-220V 59 10 34 180 mm AC220V 1PH 2000 W 50/60 Hz 6000 RPM
Technical Data
• Always wear ear protectors when using the
angle grinder .
• Do not overreach - Keep proper footing and
balance at all times.
• Do not use tool if Switch does not turn it
“ON” or “OFF”, it is dangerous.
• Check wire before use, and ensure that all
connections are secure.
• Do not carry out any alterations or modifi-
cations to the angle grinder .
Work Environment
• Do not disconnect the Tool release the oper-
ating Knob of tool and then switch off elec-
tric supply, disconnect the plug from power
and then make any adjustment , changing of
accessories or storing of tool.
• Store the tool in it’s box in dry , secure envi-
ronment.