Terumo BCT Quantum Cell Expansion System, Руководство оператора

Страница: 33 / 204

Figure 2-9: Example of a cell expansion set
Accessory Sets
The Quantum system includes the following types of accessory sets:
•
Cell inlet bags: Bags that are used to add an amount of fluid less than 0.5 L to the system. The bags
include a sample bulb. The operator manually attaches these bags to the inlet line of the cell
expansion set using a sterile tubing welder.
• Media bags: Bags that are used to add sterile, filtered media to the system. The bags include a 0.2
micron filter. The operator manually attaches these bags to the inlet line of the cell expansion set
using a sterile tubing welder.
• Waste bags: Bags that collect fluid exiting the cell expansion set. The operator manually attaches
these bags to the outlet line of the cell expansion set using a sterile tubing welder.
• Sampling coil: A coil of tubing used for sampling cells and fluid in the IC circulation loop. The
operator manually attaches the coil of tubing to the cell expansion set, using a sterile tubing welder,
when the original sampling coil on the cell expansion set has been used.
• 200 Micron in-line filter:
A filter used to remove large particulates from the inlet fluid before
loading the fluid into the system. The operator manually attaches the filter to the inlet line of the cell
expansion set using a sterile tubing welder.
Introduction
2-14 Quantum
®
Cell Expansion System • Operator's Manual for Software Version 2.1