]
TERSUS-GNSS VI
5
Check RTK Working Status
If the UHF radio is powered up, the green indicator on the UHF radio turns on. If the red indicator
is blinking on both the base and the rover, then the data link works.
If you want to make sure the RTK system works well, then you need to connect the board to
Tersus GNSS Center again. There are a group of indicator lights on the status bar of Tersus GNSS
Center. If the system is tracking GNSS signals normally, the GPS indicator will turn to green. If
the UHF data link is well established, then the base indicator turns to green. If the system gets
RTK solution, then the RTK indicator turns to yellow (float solution) or green (fixed solution). If
the RTK system is not working properly, please refer the ‘Troubleshooting’ section in user guide
Proprietary Notice
All information in this document is subject to change without notice and does not reflect the
commitment of Tersus GNSS. No part of this manual may be reproduced or transmitted by any
means without the authorization of Tersus GNSS. The software described in this document must
be used in terms of the agreement. Any reverse engineering or modification of the software,
without permission from Tersus GNSS, is prohibited.
© Copyright 2016-2017 Tersus GNSS Inc.
All rights reserved
