User Manual for David30 GNSS Receiver v2.0
82
Figure 6.16 Outline of Static Data Collection
The detailed steps for static data collection are as follows:
Hardware connection
1. Install a tripod at a designated point.
2. Install a tribrach on the tripod, adjust it to horizontal level and install the
GNSS antenna and the antenna connector on the tribrach.
3. Connect the AX4E02 GNSS antenna to the David30 with the GNSS
antenna cable.
4. Create communication between the David30 and the Android device with
cables, refer to section 3.3.1.
Software configuration
5. Run Tersus Survey app Nuwa, click [Survey] -> [Static Survey].
6. Ensure the necessary parameters including interval, cutoff angle, etc. are
filled, then click [Start].
7. Repeat steps 1 – 6 above to collect static data at other designated points.