150
/
167
side of the tractor
60cm
61cm
62cm
右侧的交接行宽度平均为61cm，比要求的行距
窄了4cm，表明农具向右偏了2cm。
将偏右2cm置入平板电脑上的农具偏移量。
这
一
趟
作
业
上一
趟作
业
Figure 197 Speculate the farm tool shift by measuring actual transfer row width at the right side of
the tractor
When the farm tool deviation is acquired through calculation, fill it into the dialogue
box of “Shift of farm tool” so as to complete the adjustment of transfer row.
Note:
When the value is filled into the shift of farm tool, it had better shift the Line AB to
the opposite direction by the same distance, so that the transfer row will be adjusted as
desired in one attempt. For example, fill “Farm tool shifts right by 3cm”, and “Line
AB shifts left by 3cm” at the same time.
6.3.6
Setting of Radio Channel Number with Shortcuts
The bottom icon at the right screen is the shortcut icon
to set the radio
channel number. Touch this icon to switch the radio channel number by shortcut
button. AG960 provides 16 channels for the users.
The channel number is to be switched usually in the following two cases.
In case of stationary reference station, when the operation area of tractor changes
from the place near one reference station to other place near another reference
The transfer row width at the right side is 61cm in
average, 4cm less than the required row space and it
means the farm tool shifts right by 2cm.
Fill the right shift of 2cm into the Shift of farm tool in the
panel computer.
last
operation
current
operation
