145
/
167
Figure 190 Result of Line AB shifting left
Note:
Line AB must be shifted based on an existing task with a set Line AB, or there is
no Line AB available to shift. In this case, it is ineffective to touch the icon.
Once the Line AB is shifted, it will be saved in the database of the panel
computer and is permanently valid, and the succeeding task path will be planned
with reference to the shifted Line AB. Even if the equipment is powered off and
restarted, when the task is reloaded, the task paths planned for the task also take
reference to the shifted Line AB
。
6.3.4
Setting of IM Width with Shortcuts
When the user changes the implement installed to the rear part of the farming vehicle,
use the fourth icon “IM width”
from the top at the right screen to change the
operation width of implement easily. The function is the same as what described in the
sub-screen “Implement setting”, but it is much easier to operate.
