Terratek T12VCS Скачать руководство пользователя | Manualshive

Страница: 22 / 22

background image

21

Environmental Protection

RECYCLING: WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST. CHECK WITH YOUR
LOCAL AUTHORITY OR RETAILER FOR RECYCLING ADVICE.

Please read the following carefully

ACL Group (Intl) Ltd. and/or it’s distributor has provided the parts list and assembly diagram
as a reference tool only. Neither ACL Group (Intl). Ltd. or its distributor makes any
representation or warranty of any kind to the buyer that he or she is qualified to do any
repairs or replace any parts of this product. ACL Group (Intl) Ltd. and its distributor expressly
state that all repairs or parts replacement should be done by certified or licensed technicians.
The buyer assumes all risk and liability arising out of his or her repairs or parts replacement to
the original product.

12 Months Limited Warranty

If within 12 months from the date of purchase you experience any problems with your product,
please return the product to its distributor/dealer for repair or replacement. This warranty
DOES NOT COVER normal wear, or any damage as a result of accidents, misuse, abuse or
negligence.

ACL Group (Intl) Ltd
Doncaster, England
Email: [email protected]
www.terratekintl.com

«
...
20
21
22

Содержание T12VCS























Отзывы:

Нет отзывов

Похожие инструкции для T12VCS

Бренд: Fein Страницы: 188

Бренд: TONI Страницы: 19

Бренд: Parkside Страницы: 48

Бренд: Hilti Страницы: 48

Бренд: GÖLZ Страницы: 86

Бренд: Jet Страницы: 24

Бренд: Proviel Страницы: 72

Бренд: Ozito Страницы: 7

Бренд: EarthWise Страницы: 48

Бренд: Scheppach Страницы: 159

Бренд: Haussmann Страницы: 25

Бренд: Defort Страницы: 29

Бренд: Hafco Страницы: 20

MetalMaster CS-350V

Бренд: Hafco Страницы: 28

Бренд: Hafco Страницы: 32

Бренд: Hafco Страницы: 34

Бренд: Ferm Страницы: 30

Бренд: Ferm Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды