62
SoundSystem SiXPack 5.1 +
Enabling the Toolbar and Status bar
You can choose to include a toolbar and a status bar when using the Video Viewing window.
1.
Open the Properties page.
2.
Tab to General. Enable
View Toolbar
to see the toolbar in the video viewing window, and
View Statusbar
to see the status bar on the window.
3.
You can remove the toolbar or status bar from the video viewing window by disabling the
selected feature.
Viewing a DVD Movie or Video CD
Insert the Title into the DVD Drive. WinDVD reads the format of the disk and starts automati-
cally.
Playing a DVD Interactive Title
Interactive DVD or MPEG2 video based titles require no special action from the user. Just install
the application and it should properly call the WinDVD drivers to playback the DVD or MPEG2
video files embedded in the application.
Zooming In
1.
Position the mouse cursor over the top left-hand corner of the desired zoom region.
2.
While holding the mouse button down, drag the cursor to the opposite end of the zoom
region. This creates a dotted line rectangle, the outline of the desired zoom region.
3.
Release the mouse button. WinDVD automatically fills the window with this zoom region.
Capturing a Still Image
WinDVD now allows users to capture a static image during movie playback. Press the "P" key at
any time to capture a BMP file of a moving or static image. Capture does not work on zoomed
regions and on some hardware motion compensation graphics chips. If you are having a prob-
lem, try disabling hardware motion compensation and capturing again.
Captured bitmaps are stored in the Capture subdirectory of the WinDVD directory on your hard
drive. Captured files are number cap001.bmp, cap002.bmp, etc.
Vocal options
When you insert a karaoke or other vocal disc into the DVD drive, WinDVD automatically reads
and correctly decodes the type of disc. The audio output is determined by the Vocal Options
properties you have selected.
