I-021 - trac6140/1/2 - Installation Guide Ver. 2.1
tracpoint | Support Team
4 |
P a g e
Fig 4: Device Positioning
Fig 5: Wiring Diagram (See Fig 14 for ACCY1056 & ACCY1075 wiring diagram)
4.
INSTALL ANTENNAE
GPS
GPS antenna is external. Follow these instructions for the correct installation of GPS antenna for optimum performance
Ensure surfaces are clean before fixing antenna.
GPS antenna can and should be installed UNDER the dash of the vehicle where possible. It may be obstructed by plastic trim but not obstructed by any
metallic objects. There is a self-adhesive label on the back of the GPS antenna for fixing. Self-adhesive label should face down and the other side of the
antenna should face the sky.
GSM
GSM antenna is inside the device enclosure, therefore care must be taken when positioning the Device
General Notes
The performance of the equipment may be impeded if the GPS antenna or Device are mounted beneath, or in very close proximity to, electrically conductive
materials, such as metal, metalized film or laminate windscreens. If this applies to the vehicle in which you work, please install the antenna and Device
elsewhere. A 20cm (7.87 inch) separation distance between the Device and all persons must be maintained at all times. The Device should not be fitted in
close proximity to any AM /FM radio or any other RF instruments installed in the vehicle.
