Terrain Dynamics 700C AIRhub, Руководство по эксплуатации, Страница: 19 / 32

www.terraindynamics.com.au Page 19
TM
7.2. Applying resistance using
different Operating modes
Once an Operating mode has been
chosen, and a minimum speed of
20km/h has been met, the AIRhub will
begin to apply resistance.
When resistance is applied a
light tapping is felt. This is
normal and indicates the
AIRhub is working.
NB#: Once a command is set,
resistance will be continuously
applied – even while the
Application is closed/in the
background.
To stop resistance a Pause
command must be sent by
using the “Pause” button on the
home screen.
Resistance will turn off when
speed slows below 15km/h. This
will not inhibit riding below
15km/h.
The device will stay active whilst
stationary for up to 2 mins.
7.2.1. Manual Wattage Mode
Using this mode, you can select
an extra resistance from 0 to 100
additional watts. It allows for the
manual application of large amounts of
resistance from 15km/h to 45km/h.
This mode is usually chosen when
maximum resistance is required, such
as high intensity efforts or strength
endurance efforts, or when the specific
increase in resistance needed is known.
(Session example, see page 24)