Terraillon TH1009N-C, Инструкция по эксплуатации

Страница: 20 / 84

20 20
CONNECTED NON-CONTACT THERMOMETER
EN
OBJECTS OR LIQUID TEMPERATURE
To measure the temperature of the surface of an object or liquid,
put the thermometer in object mode.
• Place the thermometer in your hand as shown with your thumb
on the [measure] button
the thermometer automatically
switches to room temperature mode
.
• Press the button and [M] at the same time to enter object
mode and display the screen opposite:
• Hold the thermometer and ensure the probe is around 0-5
cm from the liquid or surface whose temperature you want
to measure.
• Press the [measure] button to start the measurement. A
beep sounds signals the end of measurement. Remove the
thermometer from the object. The LCD displays the measured
temperature.
• To return to room temperature mode, press [M].
• The thermometer will automatically return back to standby mode and to body
temperature mode after 1 minute.
CAUTION:
External factors may influence forehead temperature particularly when an
individual has:
- been exposed to very hot or very cold temperatures.
- been recently swimming or bathing.
- had their forehead covered.
In these cases, let the individual stay away from the above scenario and station
in a room for 30 minutes prior to talking a temperature.
CAUTION:
After press the measure button, the distance sensor will detect the distance
between the forehead and thermometer. If the distance is between 1- 5 cm, it
will directly test the forehead temperature.
If the distance is more than 5cm or less than 1cm, short successive beep
sounds will be issued indicating that the thermometer should be moved to
the forehead in 1- 5 cm. When the correct distance is reached a double beep
signals it.
If it is not the proper distance for forehead temperature, the thermometer will
measure ambient temperature.
CHECK THE MEMORY
• There are a total of 30 memory data for recording forehead temperature
measurements.
• The current measurement is always stored in the last storage space. When all
storage spaces have been occupied, the oldest measurement is always deleted
from the memory.
• Press [M] button to turn on thermometer and [M] button again to enter in memory
data .
The LCD displays memory number followed by measured temperature like figures.
Press the [MEM] button repeatedly to go to the memory number you need (30 is
the youngest, 1 the oldest).
MAINTENANCE
• Clean the thermometer with a soft, dry cloth.
• Clean both lenses with a cotton swab moistened with alcohol
and immediately wipe dry with a clean cotton swab. After
cleaning, allow at least 20 minutes drying time before taking
temperatures.