USING THE PRODUCT
1. Press “M” to access massage cycles.
Attention:
Please make sure to start from the lower gear and then increase step by step according to personal favor.
2. Press “M” key to choose the massage modes.
NO. MODE
MODE EXPLANATION
RESISTANCE
500Ω
MAX
FREQUENCY PULSEWIDTH DURATION
1
PALM PRESS
Simulate uniform frequency tapping with fist on
horizontal direction
22 V
5 Hz
200 ms
15 min
2
MASSAGE
Simulate pressing by palm, with vibrating up and
down
28,6 V
17,85 Hz
56 ms
15 min
3
KNOCK
Simulate the pinching by five fingers, push up from
ankle to calf
25,2 V
31,25 Hz
32 ms
15 min
4
FINGER PRESS
Simulate continuous shaking
on the calf
38,8 V
35,7 Hz
28 ms
15 min
5
KNEAD
Simulate high frequency tapping
with side palm
25,8 V
18,51 Hz
54 ms
15 min
6
MULTI MODET
Auto combination of several modes for relaxation
22,8 V
50 Hz
20 ms
15 min
3. Press “+” / “-” key to increase or decrease the strength.
There are 15 gears in total, the bigger number, the
higher strength.
4. When completed the setting, please sit down and put
your feet on to the scale as per the picture. The device
will start to work while shows running “ ”
Tips:
1. The default working time is 15 minutes and it will automatically turn off. It will not be changed by adjusting
strength, but it will be reset to 15 minutes if any massage mode change during using.
2. There will be BEEP sound that lasts for about 10 seconds before auto-off.
3. Under massage function, long press “ ” key for few seconds, it will switch the function to weighing.
4. Under Massage function, press “M” key for few seconds, and it will switch off the device.
The massage is done sitting down with dry feet and starting with the lowest intensity. You should not feel any
pain; if you do, you should immediately reduce the intensity and/or stop the massage.
MASSAGE FUNCTION
EN
9