IC10/20FR
Page 5
To avoid risks and/or damaging the device:
•For indoor use only.
•Do not place the incubator in a room exposed to
direct sunlight or to high luminous intensity lamps.
•Do not place the incubator near devices that emit
strong electromagnetic fields.
•Do not use the incubator on leaned surfaces or
on surfaces that are subject to shocks, vibrations,
temperature or high relative humidity.
•Disconnect the power cord before cleaning.
•Do not use abrasive, corrosive cleaners or
disinfectants.
•Do not immerse into any liquid. Do not pour any
liquid inside.
•Make sure the incubator is connected to an
appropriate electrical mains outlet socket.
•Use only the included power supply (AC power
adapter), power supply's AC plug, power supply
cords, and USB cable. Verify that all the included
elements are in good condition on daily basis. If any
of them is damaged, discontinue their use. The use
of cables, adapters, cords, and/or power supplies
different from the ones included may cause fires,
electrical shocks, or even physical injuries.
•Do not plug any devices into the Incubator's USB
port other than a personal computer (PC). The PC
has to be compliant with IEC60950-1, IEC 62368-1
or comparable, with safety extra-low voltages on its
USB ports. Ask a qualified technician to verify device
Symbols
Safety information
Operating relative humidity.
Operating temperature.
Caution, Warning, Attention - Refer to the
instructions for use.
Caution: Hot surface.
Important.
Direct current.
For indoor use only.
Keep away from sunlight.
Batch code.
Manufacturer.
Separate collection for waste of electrical and
electronic equipment.
80 %
30 %
10 ºC
30 ºC
References
Protective cover.
1
Incubation Area for 12 SCBIs and 1 Protein Pen.
SCBI Ampoule Crusher.
2
Control Panel.
3
Red Light / Positive Indicator.
4
Green Light / Negative Indicator.
5
Incubation Position Number.
6
Incubation Time Selection Buttons.
7
Incubation Temperature Selection Button
/ Time Left.
8
Alarm Cancellation Button.
9
Thermal Printer.
10
Printer's Paper Indicator Light.
11
Paper’s traction button.
12
Cavity for Paper.
13
USB Port.
14
Input for Power Supply Plug (12Volts DC).
15
16
Hole for External Temperature Control.
Indications for Use
United States of America
Terragene
®
Bionova
®
(IC10/20FR) Reader Incubator incubates
at 60°C and reads the Terragene
®
Bionova
®
SCBI (BT220,
BT221, BT222, and BT223) for fluorecent results at 30 minutes
(BT223), 1 hour (BT221, BT222), and 3 hours (BT220).
Outside the United States
Terragene
®
Bionova
®
Reader Incubator (IC10/20FR) incubate
at 60°C and 37°C, and read the Terragene
®
Bionova
®
SCBIs
and the Terragene
®
Chemdye
®
Hygiene Monitoring System
Indicators at the times prescribed in the User Manuals.
LOT
Safety information
