Terradonis JP3, Руководство пользователя

Страница: 10 / 10

Terradonis is a registered trademark of ICS
ZA de Croix Fort - 12 rue du Soleil - 17220 La Jarrie - France - Tel: +33 5 4635 2828, Fax: +33 5 4635 2829
contact@ics-agri.com www.terradonis.com
➊
Place the seeder
on its side. the side
without gearbox up.
addiTion/suPPression oF seedinG elemenT
18 19
The
JP3
(with a frame of 30 cm wide) can be used in maximum 4 rows
Maximal spacing between 2 rows is 30 cm when used in a 2 row version.
Maximal inter-row spacing is 10 cm if used in 4 row version
The JP6 (with a frame of 60 cm) can provide 7 rows maximum. The maximal
inter-row spacing would then be 10 cm too.
➜
It IS POSSIBle tO ADD OR tO SuPPReSS SeeDING elemeNt(S).
➜
hOw tO ADD/SuPPReSS 1 ROw :
➋
unscrew and take off each bolt,
nut, washer, so that you can release
the frame side bar.
➌
take off or add the seeding
element.
In the case you add a row, make sure
that the driving sprocket of the hopper
fits the driving axle (hexagonal male
and hexagonal female).
➍
Replace the frame side bar, replace bolts, nuts, washers.
the SeeDeR IS ReADy tO wORk AGAIN.
noTes