9
Recommended accessories
1. Power supply PS202F
2. Power inserter PI012
3. Multiswitch programmer PC102W
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled or discarded according to applicable local
and national regulations.
Equipment intended for indoor usage only.
Functional grounding. Connect to the main potential equalization.
This product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN62368-1, RoHS norm EN50581.
This product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical equipment“ CU TR 020/2011,
“On safety of low-voltage equipment“ CU TR 004/2011.
This product is in accordance with safety standard AS/NZS 60065 and EMC standards of Australia.
C
onfiguration
The default setting of the device can be changed using dedicated programmer and software.
These multiswitches can be configured:
1. Up to 32 User Bands (UB) per pair outputs (SRM524 and SRM524T- total 32 UB, SRM544, SRM544T- total 64 UB)
for use with STBs supporting DiSEqC commands according to standard EN50607 (dSCR).
2. Default settings
Dynamic mode
can be changed to
Static mode
.
3. Default setting Satellite A/B can be changed to C/D (see
Application diagrams
for installation 4 wideband LNBs
(SAT B/C/D in the case Quattro LNB IF range input mode).
PC Windows software can be free downloaded from
www.terraelectronics.com
.
Output configuration must be the same per pair of outputs, but can be different in others pairs. Each pair of outputs are
configured separately. Pay attention to the numbering of outputs.
Some possible outputs pair configurations shown in Table 4.
Table 4
Input mode
Output 1
Output 2
Wideband LNB
SAT A: LO=10410 MHz. SAT B: LO=10400 MHz.
Other settings default.
SAT A: LO=10410 MHz. SAT B: LO=10400 MHz.
Other settings default.
Wideband LNB 8 SCR/dSCR UB + up to 24 dSCR UB
Up to 24 dSCR UB
Quattro LNB
8 SCR/dSCR UB + 24 dSCR UB, PIN protected
Legacy
Wideband LNB Static mode (up to 32 converted transponders)
Static mode (up to 32 converted transponders
Wideband LNB 8 SCR/dSCR UB + Static mode
(up to 24 converted transponders)
Up to 24 dSCR UB
See programmer user manual for more information.
