15
Figure 17 "SNMP settings" is located in “IP parameters” tab.
The description of the SNMP configuration parameters:
"sysLocation", "sysContact", "sysName" acts as contact
information of device owner.
"Read Community" - community name acts as a password that
is shared by multiple SNMP agents and one or more SNMP
managers. "Read Community" password is used for read-only
access to the modules parameters.
"Write Community" - is the password used for read-write access
to the modules parameters.
"Enable TRAP" - SNMP traps are alerts generated by
agents on a managed device. Check this box to enable
TRAP
generation. The module generates traps when the diagnostic
message occurs.
"TRAP Community" - is the password used for accessing of
TRAPS.
"Trap IP #1","Trap IP #2", "Trap IP #3" - IP addresses of hosts
with SNMP managers, where TRAPS will be send.
Use downloaded MIB file with your SNMP manager for accessing
all device parameters.
Picture 17: SNMP settings
8.7
Services
One channel at a time can be setup in this page. Select proper channel from the list at „Choose input channel“
combobox (see picture 18).
Picture 18: Services
A list of scanned services of selected channel will appear. „Rescan“ button will load all service information of
that channel. „List of services“ table shows a list of available services. Icon before the service name indicates
service type. Bitrate of each service is measured in real time. „LCN“ field is a Logical Channel Number. Every
service can have a „channel number“ and TV will sort channels according to it. Just ensure, that all services
in all channels have different numbers. Value 0 means, that LCN for that service is not used at all and TV will
sort these channels according to it’s own rules. If channel numbers are added, but TV does not recognize it,
check the following:
- If TV supports LCN?
- If Network ID and Original Network ID values are valid for the country, which is selected on TV?
„Enable“ checkbox enables the service to the output.
Press onto „+“ sign and service information will be extended (see picture 19).