Terra Universal Smart IsoDry Nitro-Watch Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 14

Terra Universal Smart IsoDry Nitro-Watch Скачать руководство пользователя страница 3

Installation and Operating Guide

Smart® IsoDry™ Nitro-Watch™

©

Copyright 2021 Terra Universal Inc. All rights reserved. • Document No. 1800-19

Terra Universal, Inc. • TerraUniversal.com • 800 S. Raymond Ave. • Fullerton, CA 92831 • TEL: (714) 578-6000 • FAX: (714) 578-6020

3

1.

General Information

The Smart® IsoDry® Nitro-Watch™ senses and displays the relative humidity level (from ambient to 0%) inside a desiccator

or glove box within ±1.5% RH. It operates in tandem with the Dual Purge System and Automatic RB Valve to precisely and

automatically control the flow of nitrogen into the desiccator, or glove box, and maintain a preset humidity level, no matter

how operating conditions may change. The Nitro-Watch™ consists of a humidity sensor and a controller unit. This system

also logs RH, temp, door open/close, purge on/off, and sensor removal/ attachment. The system can log months of data

depending on the logging interval selected, all of which can be downloaded to a USB flash drive.

Note:

This manual focuses on specific setup and operating instructions for the Smart® IsoDry® Nitro-Watch™ Control

system. For installation instructions and general specifications for these products please see below:

Adjust-A-Shelf™ Cabinet or Dual Purge

Doc. #1800-40: Desiccators and RH Controllers

IsoDry® desiccator

Doc. #1788-26 IsoDry® RH Control System

GloveBox

Doc. #1800-42 Series 100 GloveBox

Nitro-Watch™ Sensor

Nitro-Watch™ Controller

«
1
2
3
4
5
...
»

Содержание Smart IsoDry Nitro-Watch















Отзывы:

Нет отзывов