manualshive.com logo in svg

TERO TERO-1000, Руководство пользователя

Поделиться
Скачать
TERO TERO-1000 Скачать руководство пользователя страница 4

01

2

Safety Instructions

TERO - USER’S GUIDE

When using electrical appliances, basic safety precautions 

should always be followed including the following:
1. 

Read all instructions before using your Tero device.

2.  To protect against risk of electrical shock 

do not put the 

Tero unit in water or other liquid.

3.  This appliance is not intended for use by children or 

by persons with reduced physical, sensory, or mental 

capabilities, or lack of experience and knowledge. Close 

supervision is necessary when any appliance is used near 

children. Children should be supervised to ensure that 

they do not play with the appliance.

4.  Turn the appliance OFF, then unplug from the outlet when 

not in use, before assembling or disassembling parts and 

before cleaning. To unplug, grasp the plug and pull from 

the outlet. Never pull from the power cord.

5.  Avoid contacting moving parts.
6.  Do not operate an appliance with a damaged cord or plug,  

or after the appliance has malfunctioned, has been 

dropped or damaged in any way. Contact Tero Technical 

Support at 

1 833 551-3836 or go on our website for 

information on the inspection, repair, or adjustment  

at 

teroinnovation.ca/support

7.  The use of accessories that are not sold by the manu-

facturer are not recommended, it might result in fire, 

electric shock or injury.

8.  Do not use outdoors.
9.  Do not let the power cord hang from a table or counter.
10.  The blades are sharp. Handle carefully.
11.  To reduce the risk of injury, never place the blades in the 

device without first putting the bucket properly in place.

12.  Make sure that the cover is securely locked in place before 

operating the appliance.

13.  Do not attempt to bypass the cover’s locking mechanism.
14.  Do not fill the bucket above the maximum fill line to avoid 

risk of injury or damage to the appliance.

15. 

  

CAUTION

  

To provide continued protection against risk of electric 

shock, connect to properly grounded outlets only.

16. 

  

CAUTION - HOT

 

Risk of burns. Wait until the end of the cycle, when the 

cooling phase is complete, before removing the blades  

or the bucket.

17.  Unplug the device before inserting or removing parts.
18.  Household use only.

FCC Information 
This equipment has been tested and found to comply with  

the limits for a Class B digital device, pursuant to Part 15  

of the FCC Rules and complies with the Canadian ICES-003/

NMB-003 standard. Its operation is subject to the following 

two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference 

received, including interference that may cause undesired 

operation.
These limits are designed to provide protection against 

harmful interference in a residential installation. This 

equipment may radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which 

can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or 

more of the following measures: 
• 

Reorient or relocate the antenna receiver.  

• 

Increase the distance between the equipment  
and the receiver. 

• 

Connect the equipment to an outlet on a circuit different 
from that to which the receiver is connected. 

• 

Consult the dealer or an experienced radio/TV technician  
for assistance

  

CAUTION

 

No changes or modifications to the equipment,  
not expressly approved by the party responsible 
for compliance, are permitted in order to comply 
with FCC regulations. This party could compromise 
the user’s authority to operate the equipment.

  

CAUTION

 

Never put contents in the device when the bucket is 

missing. This may cause serious damage to the device. 

Never start the device when the bucket is empty or missing.
The blades must be secured in the bucket and in the device 

before placing food to prevent the food from blocking the 

blade lock.
Do not use the device if the blades are damaged.
Respect the bucket’s fill line. Do not overload the device,  

this may cause a blockage during the cycle or prevent the 

proper completion of a cycle.
Add only the food waste recommended in the Acceptable 

Materials section.

Содержание TERO-1000



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды