15
Remove the two wing nuts from the bottom of the base.
Insert the power cable through the slot in the central part of the base and then
assemble the body to the base.
Attach the body to the base by tightening the two nuts previously removed.
OPERATIONS
Open the base by rotating it, place the device in a flat, stable surface, so that the safety
switch can work Connect the plug to a wall socket.
CONTROL PANEL
Select the desired heating power.
Press the red button to operate.
The device in this mode generates 400W.
Press the following buttons to select 800W and 1200W respectively.
By pressing the button " Turn" you can enable or disable the oscillation.
SAFETY DEVICE
The unit will be turned off automatically if it is tilted or laid down
CLEANING AND MAINTENANCE
The unit needs to be cleaned periodically.
Before cleaning the grids remember to unplug the power cord and wait until the unit
has cooled down.
Never use solvents or flammable substances. Use a slightly damp cloth.
SPECIFICATIONS
Voltage: 220-240V ~ 50/60Hz
Output Power: 1200W (400/800/1200W)