19
professionally qualified personnel, who will make sure that the outlet wiring
section is appropriate for the absorbed power of the appliance. In general, the
use of adapters or extension cords is not recommended; if their use cannot
be avoided, they must conform to existing safety standards and their current
capacity (amperes) must not be less than the maximum appliance capacity.
⚫
The appliance must be positioned at a safe distance from heating sources,
inflammable materials (curtains, cloth, etc.), inflammable gas or explosive
materials and from materials that may be deformed by high temperatures.
Make sure that a space of at least 1 metre
⚫
Stand the appliance on a horizontal, flat surface or table; Never place the
appliance on a sloping surface as this can cause it to fall over. Never lay the
electric cord under rugs or carpets.
⚫
Make sure that the cable is is left free in front of the appliance, and 50 cm of
free space at each side.positioned correctly, that it is not in contact with hot
elements or sharp edges, that it is not wound around the appliance, that it is
not twisted, or in a position which can cause the appliance to fall over. Check
that the cable cannot cause tripping in order
to pr
event accidental falls or
injury.
ASSEMBLY
The wheel mounting brackets must be fixed to the underside (see up-down
arrow on the label placed on the appliance) and at the ends of the appliance to
ensure stability; the wheels must be pointing downwards
and must be perfectly level. To assemble follow these
instructions (refer to the figures alongside):
1. Unscrew the nuts from the wheels (turning them in an
anti-clockwise direction), position the flat washers on the
