TermoPool Turbo Silence, Инструкция по установке и эксплуатации

Страница: 44 / 60

※
Above data is subject to modification without notice.
2.2.2.Heat pump installation.
The frame must be fixed by bolts
foundation must be solid; the bracket must be strong enough and anti
The heat pump needs a water pump
specification-flux: refer to Technical Parameter, Max. lift
When the heat pump is running, there will be condensation water discharged from the bottom,
please pay attention to it. Please insert the drainage tube(accessory) into
then connect a pipe to drain off the condensation water.
2.2.3.Wiring & protecting devices and cable specification
Connect to appropriate power supply, the voltage should comply with the rated voltage of the
products.
Well earth the heat pump.
Wiring must be connected by a professional technician according to the circuit diagram.
Set breaker or fuse according to the local code (leakage operating current
The layout of power cable and signal cable should be orderly and not
UNIT=MM
M
o
d
e
l
AXCR10
AXCR13
AXCR17
AXCR21
AXCR28
AXCR28T
AXCR35T
AXCR40T
13
Above data is subject to modification without notice.
The frame must be fixed by bolts (M10) to concrete foundation or brackets. The concrete
foundation must be solid; the bracket must be strong enough and anti-rust treated;
The heat pump needs a water pump
(Supplied by the user) . The recommended pump
flux: refer to Technical Parameter, Max. lift ≥10m
When the heat pump is running, there will be condensation water discharged from the bottom,
please pay attention to it. Please insert the drainage tube(accessory) into
then connect a pipe to drain off the condensation water.
2.2.3.Wiring & protecting devices and cable specification
Connect to appropriate power supply, the voltage should comply with the rated voltage of the
Wiring must be connected by a professional technician according to the circuit diagram.
Set breaker or fuse according to the local code (leakage operating current
The layout of power cable and signal cable should be orderly and not affecting each other.
A B C D E F
407 434 390 432 799 300
407 528 390 432 893 280
407 574 390 432 939 350
407 630 390 432 995 460
404 760 384 429 1125 600
514 710 493 539 1074 640
514 710 493 539 1074 640
514 900 493 539 1264 650
Above data is subject to modification without notice.
to concrete foundation or brackets. The concrete
rust treated;
. The recommended pump
When the heat pump is running, there will be condensation water discharged from the bottom,
please pay attention to it. Please insert the drainage tube(accessory) into the hole and clip it well,
Connect to appropriate power supply, the voltage should comply with the rated voltage of the
Wiring must be connected by a professional technician according to the circuit diagram.
Set breaker or fuse according to the local code (leakage operating current
≤ 30mA ).
affecting each other.
G H
74 650
74 650
74 650
74 750
74 952
74 947
74 947
74 947