28
Hot water temperature that you have set will be decisive within few
time according to distance of water heater to the tap and water
pressure changing.
Although “Shower” and “Fan” signs at LCD display of water heater, if
the water heater gives E1 error before heater operating, be sure that
gas water heater receive the gas and try to make operation a few
times . If it is not operating apply to authorised service.
The fault code may occur on the Lcd display when the device does
not operate and the device may give an audio warning. The
meanings of these codes are:
Fault codes
FAILURE DESCRIPTION
E0
Water Inlet Sensor Failure
E1
No ignition
E4
Fan Failure
E6
NTC Failure
5.1.1.Water Temperature Control