Preparation of the heating panel to connect to WIFI
Turn on the heater and make sure it is within WiFi range. The LED indicator will flash rapi
-
dly. If the indicator does not flash quickly, press and hold the „TIMER” button (located on
the remote control) for about 3 seconds, the device will beep. The radiator is then ready to
connect to the application.
Connecting the heating panel with the application
Having prepared the heating panel, start the TERMOFOL SMART application and after log
-
ging in to the application on the main screen, select the add device function.
On the next screen, select the thermostat icon, and on the next screen, select the
„confirm fast blinking display” option and select the „next” button. On the next screen,
enter the access password of the wifi network to which the heater is connected and
confirm by selecting the „next” button. The connection process is fully automatic, and its
progress can be tracked on the screen showing the progress of time and on the 3-point
axis indicating the subsequent stages of establishing the connection. After completing
the connection process, the progress indicator will reach level 3, after which a screen will
automatically appear informing about the successful addition of the device and allowing
for a possiblechange of the name of this device under which it will be displayed in the
application. Weapprove the entire process by clicking on the „Done” in the upper right
corner of the application screen.
WiFi
indicator
(blove)
„TIMER” button
